Solo fence guide · United StatesPatent pending · Engineered in Australia · 2-year limited warranty
Shop the setter ↗

Set fence posts on your own.

POSTA is a tripod post setter. Clamp it to your post, stand it plumb and POSTA holds it steady while you pour. No second pair of hands needed.

Shop the setter

Watch it hold the post13 seconds
  • Timber, steel, round posts and H-beams
  • Two-axis gimbal with fine adjusters
  • 150 kg (330 lb) working load
  • 7.9 kg (17.4 lb), folds for the truck

“So we set the 2 posts just as you see here, dug the holes, set the posts, got them plumbed, filled them with concrete, done. Less than 3 minutes once we had the holes dug to be pouring concrete.”

MannyRedlands Ironworks, Redlands, CaliforniaOn camera with POSTA

“I saw a Facebook ad for POSTA and was immediately smitten. The way that it can hold the post in place and get it perfectly level and perfectly straight.”

ScottRamona, California. 6,500 feet of horse fence with four POSTAsOn camera with POSTA

“Very handy tool, and well made. Definitely a quality product.”

RayVerified review on postatool.com (US store) · 23 September 2026

Up to 10x Faster Post FixingOne Person, Perfect PostsPatent PendingCompact & Easy to Carry

How it works

Clamp it. Level it. Pour.

  1. Set and clamp.Stand the tripod over the hole with all three feet on firm ground. Drop the post into the holder and tighten the screws or clamp so it cannot twist or slide.
  2. Level the post.Put a level on the post. Use the two adjusters to centre the bubble front to back, then side to side. Lock the head.
  3. Pour and set the height.Pour with the post held solid. Start a touch high and tap the post down to your finished height, then lock it off.
Shop the setter

Full setup diagrams in the instruction manual and the technical guide.

Clamp, level, pourBackyard post
330 lbmax working load per setter (150 kg)
24 inhole it spans comfortably (600 mm)
17.4 lbtool weight, folds for the truck (7.9 kg)
2 axisgimbal head with fine adjusters
1 personto clamp, level and pour

Why we built POSTA

Two people and a pile of offcuts, or one tool.

We are engineers. We designed POSTA in Australia because setting posts perfectly plumb used to take too much time and labour, often requiring a second person. POSTA is one tool that clamps to the post, stands it upright, levels it and holds it securely in place while the concrete is poured.

“It usually takes multiple people and multiple tools to get it right.”
“Stands, levels and sets posts ready for concrete in under a minute.”

Tristan, POSTAFrom our film, Why we built POSTA

Shop the setter
Why we built POSTATristan and the team

Real jobs, real customers

From a horse fence in California to a 240-post barn.

Scott, Ramona CA6,500 ft horse fence
The way that it can hold the post in place and get it perfectly level and perfectly straight.
Manny, Redlands IronworksRedlands, CA
Less than 3 minutes once we had the holes dug to be pouring concrete.
Kenny, Eastside Retaining WallsPartial retaining wall
So I can’t imagine doing this without the POSTAs.
Peter, Cafarella Constructions100 m retaining wall
It’s saved two weeks in time to set these holes.
Kieran, diesel fitterFour shade-sail columns
Not one of them moved out of position during the pour.
Devon, Victoria240 barn posts
I bought POSTA to make the job easier and get a 100% perfect alignment of our poles here in the barn.
BradPool fence, solo
POSTA is like a second pair of hands.
Solar crew, Shackleton WAArray posts 1.8 m deep
Our first go at them, they worked extremely well.

Videos play muted while on screen. Tap for sound.

What our customers say

In their words, not ours.

“They’re not the cheapest but they’re great. I think it’s worth the money.”

MannyRedlands Ironworks, five POSTAs on the crewOn camera with POSTA

“I saw a Facebook ad for POSTA and was immediately smitten. The way that it can hold the post in place and get it perfectly level and perfectly straight.”

ScottRamona, California. 6,500 feet of horse fence with four POSTAsOn camera with POSTA

★★★★★

“Very handy tool, and well made. Definitely a quality product.”

RayVerified review on postatool.com (US store) · 23 September 2026

★★★★★

Save time, money and save the stress… get yourself a Posta

“I was lucky enough to come across Posta… this saved me weeks worth of work. What an amazing idea… it really is as simple to use as the website shows. Dig your hole, attach your post to Posta… set it in place… adjust and you have a solid, plumb post ready for concreting.”

Alex HVerified review on postatool.com · 27 March 2025

★★★★★

Game changer

“Used this to set big 150mm posts for post and rail fencing and this made the whole process a dream. So quick to get the post level and holds it firm while you concrete. So much faster that bracing with timber and it elevates the post so you can concrete under. So glad I purchased this.”

Ryan MurphyVerified review on postatool.com · 20 December 2025

Joe Gagne’s finished lean-to support post

“This made my last project of setting my support post for my 20”x16’ lean to so easy as a 1 man project.”

Joe GagneLean-to support postCustomer message and photo

★★★★★

Awesome product, saves me heaps of time

“I used posta to build a deck at my house, I'm not much of a handyman so it made my life heaps easier. I can set posts straight and fast”

Nick PhillipsVerified review on postatool.com · 23 October 2025

★★★★★

Very Cool Concept. Looking forward to future versions

“I used this because my employee is out for a couple months and didn't want to train someone new. Honstly think I do all my work with just this tool now. Would love to see Micro height Adjustments in the future!”

Cameron MacielVerified review on postatool.com · 1 May 2025

“This tool made the process so quick and easy. I didn’t need to rely on anyone else to help, and the posts turned out perfectly level without the usual hassle. The compact design made it easy to carry around, and it felt solid in my hands.”

Michael, IvanhoeDIYerCustomer story on postatool.com

“Your jigs made the whole process so much easier. Being able to make fine adjustments to the position and angle of such large, heavy posts without having to constantly reposition braces was an absolute game changer.”

KieranDiesel fitter. Four 150 x 150 mm shade-sail columnsCustomer message

“How has no one thought of this? It makes total sense. This simple tool made building my deck so quick and easy”

Jack, KewTradieCustomer story on postatool.com

“So I can’t imagine doing this without the POSTAs. It would have been even more of a headache than what it was.”

KennyEastside Retaining WallsOn camera

Shop the setter

Timber braces or a post setter?

What changes on the day.

What you need on the dayPOSTATimber bracesA mate holding it
Both hands free for the pour✓ Yes✓ Once the braces are screwed on✗ No
Fine plumb adjustment after setup✓ Two adjusters at the head✗ Unscrew, move, re-check✗ Nudge and hope
Post held off the bottom so concrete flows underneath✓ Yes, suspended in the hole✗ Needs packing✗ Needs packing
Moves to the next post✓ Fold the legs, carry it✗ New offcuts, new screws✗ Their time again
Second person needed✓ No✓ No, but slower✗ Yes, every post
Holes it suits✓ Up to 600 mm, sloped or rough ground✓ Any, with enough timber✓ Any
Shop the setter
Two-year limited warranty

Covers genuine manufacturing faults in the tripod, actuator, gimbal assembly and welds.

30-day returns

Unused and in its original packaging. Return shipping and a 15% restocking fee apply on change of mind.

Ships from our Utah warehouse

US orders are usually processed within 24 hours, with tracking by email. Most US states; not yet Alaska, Hawaii or US territories.

Engineered in Australia

Patent pending. Designed for fence, deck, retaining wall and general construction posts.

Questions

Before you order.

Instruction manual ↗ · Technical guide ↗ · Contact POSTA ↗

Where do you ship from?

US orders ship from our Utah warehouse and are usually processed within 24 hours, with tracking by email. Shipping is calculated at checkout. We don’t yet ship to Alaska, Hawaii or US territories; contact us for those.

What if it’s not right for me?

You have 30 days from delivery to request a return on an unused setter in its original packaging. Return shipping and a 15% restocking fee apply. Manufacturing faults are covered by the two-year limited warranty.

Will it hold my post?

Each setter is rated to a 150 kg working load. The holder has fixing holes for screwing to timber, or you clamp steel, round posts and H-beams. It spans holes up to 600 mm across on flat, sloped or rough ground.

What if I’m setting a post against a wall or fence?

With the standard tripod the post centre sits about 485 mm off a wall, or about 343 mm if you rotate the legs. For a boundary fence line, add the optional Side Prop and run the tripod hard up against it.

How many do I need?

One or two for DIY and small jobs. Three or four for a small crew. Six to ten or more for high-volume or grid work, so every post in a pour is held at once.

Get set for your next fence line.

Shop the setter
The Original Post Setter
Shop the setter